Sony Satellite Radio XT XM1 User Manual

3-243-168-21 (1)  
Welcome!  
Introducing XMTM Satellite Radio  
Thank you for purchasing the Sony XM Satellite  
Radio Receiver. The receiver allows you to:  
Receive XM Satellite Radio programming  
(with subscription) by connecting a Sony  
master unit* compatible with the Sony BUS  
system.  
Connect and use an optional CD or MD  
changer.  
Receive up to 100 channels of XM  
programming.  
There’s a world beyond AM and FM. XM  
Satellite Radio. Up to 100 channels. Coast-to-  
Coast Coverage. Digital quality sound. With  
many commercial-free music channels. Plus, the  
best sports, comedy, talk, news and  
entertainment, including USA Today, Discovery  
Radio, NASCAR, Sesame Workshop, CNNfn.  
is waiting.  
Display channel name, artist name, and song  
title for most XM channels.  
How to Subscribe  
Listeners can subscribe by visiting XM on the  
Listener Care at (800)852-9696. Customers  
should have their Radio ID ready; it is located  
on the side of this unit, and you can also check it  
in the display of this unit (see “Displaying the  
XM Radio ID”).  
Store favorite XM channels.  
XM Satellite  
Search XM channels by category.  
* Some master units may not be connected to this  
receiver. (For details, please consult your nearest  
Sony dealer.)  
Radio Receiver  
Technology. It is prohibited to copy, decompile,  
disassemble, reverse engineer or manipulate any  
technology incorporated in receivers compatible  
with the XM Satellite Radio system.  
Operating Instructions  
Specifications  
Frequency  
Power requirements 12 V DC car battery  
(negative ground)  
Outputs  
2332.5 – 2345.0 MHz  
Furthermore, the AMBE® voice compression  
software included in this product is protected by  
intellectual property rights including patent  
rights, copyrights, and trade secrets of Digital  
Voice Systems, Inc. The user of this or any other  
software contained in an XM Radio is explicitly  
prohibited from attempting to copy, decompile,  
reverse engineer, or disassemble the object code,  
or in any other way convert the object code into  
human-readable form. The software is licensed  
solely for use within this product.  
BUS control output  
Audio output  
Antenna input (Satellite,  
Terrestrial)  
BUS control input  
Audio input  
224 × 37.8 × 160 mm  
(8 7/8 × 1 1/2 × 6 3/8 in)  
(w/h/d)  
Inputs  
Owner’s Record  
The model number is located on the bottom and serial number also on the bottom.  
Record the serial number in the space provide below. Refer to these numbers  
whenever you call upon your Sony dealer regarding this product.  
Dimensions  
Mass  
Approx. 1.0 kg  
(2 lb 4 oz)  
Model No. XT-XM1  
Serial No.  
XM Radio ID  
Supplied accessories Parts for installation and  
connection (1 set)  
Getting Started  
Design and specifications are subject to change  
without notice.  
You need to subscribe for XMTM Satellite Radio Service to listen to the radio  
broadcast.  
Resetting the master unit  
Before operating the XM receiver for the first  
time, reset the master unit. If the unit is not reset  
in this manner, it may not function properly. For  
details on how to reset it, refer to the operating  
instructions of the master unit.  
Caution  
For the following master units, press the Repeat  
(REP) button of the master unit for two seconds  
after turning the XM on and select “setup 2.”  
Without this procedure, the master unit will not  
display tuning-in information from the receiver  
correctly. Except for the following master units,  
“setup 1” is selected in the factory settings.  
XT-XM1  
Sony Corporation © 2002 Printed in Japan  
CDX-C8050X  
CDX-M750  
CDX-M650  
CDX-M610  
CDX-M600  
MDX-C800REC*  
MDX-C8500X  
XR-M550  
WARNING  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
* You may observe flickering in parts of the display  
while performing operations. This is not  
malfunction.  
Note  
Resetting the master unit will erase the clock setting  
and some stored contents of the master unit.  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment and receiver.  
— Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
— Consult the dealer or an experienced radio/TV technician for help.  
You are cautioned that any changes or modifications not expressly approved in this manual  
could void your authority to operate this equipment.  
If you have any questions or problem concerning this product, consult your nearest Sony  
dealer.  
If you have any questions or problem concerning the XM Satellite radio service including the  
broadcast, consult XM.  
The XM Radio ID (XM-ID) is required when consulting XM. It is located on the bottom of the  
main unit, and you can also check it in the display of this unit (see “Displaying the XM Radio  
ID”).  
 
Installation  
Connection  
Parts list  
Connection example  
The numbers in the list are keyed to those in the instructions.  
Sony BUS Compatible  
1
2
3
4
XM Antenna*  
Car Audio*  
ø4 × 14 mm  
5.5m  
5.5m  
5.5m  
× 4  
XT-XM1  
Precautions  
Choose the mounting location carefully, observing the following:  
CD/MD changer*  
— The unit is not subject to temperatures exceeding 55°C (131°F) (such as in a car parked in direct  
sunlight).  
* not supplied  
— The unit is not subject to direct sunlight.  
— The unit is not near heat sources (such as heaters).  
— The unit is not exposed to rain or moisture.  
— The unit is not exposed to excessive dust or dirt.  
— The unit is not subject to excessive vibration.  
— The fuel tank should not be damaged by the tapping screws.  
— There should be no wire harnesses or pipes under the place where you are going to install the  
unit.  
Connection diagram  
— The spare tire, tools or other equipment in or under the trunk should not be interfered with or  
damaged by the screws or the unit itself.  
Be sure to use only the supplied mounting hardware for a safe and secure installation.  
Use only the supplied screws.  
Installing the unit  
•Mount the unit either inside the trunk or under a seat.  
•Choose the mounting location carefully so the unit will not interfere with the normal movements of  
the driver and it will not be exposed to direct sunlight or hot air from the heater.  
•Do not install the unit under the floor carpet, where the heat dissipation from the unit will be  
considerably impaired.  
First, place the unit where you plan to install it, and mark the positions of the four screw holes on  
the mounting surface.  
Note  
Connect with a BUS cable to  
the XM Satellite receiver,  
aligning the v marks.  
When you use an optional BUS cable, note  
that a BUS cable with an 8-pin plug (L-type)  
cannot be used because of its shape.  
1
1
SONY BUS  
OUT  
POWER  
Screw hole:  
5
32  
ø3.3 mm ( / in.)  
XM Radio ID number seal  
(XM ID XXXXXXXX)  
2
Notes  
• Use only the supplied screws.  
• Be sure not to damage the fuel tank or brake line with the tapping screws.  
Connect with the connector  
hook facing down.  
Fuse replacement  
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after  
replacement, there may be an internal malfunction.  
Fuse (3 A)  
To a +12 V power terminal which  
Yellow  
is energized at all times  
Be sure to connect the black ground  
lead to it first.  
Warning  
Use a fuse with the specified amperage rating.  
Use of a higher amperage fuse may cause serious damage.  
To a metal point on the car  
First connect the black ground lead,  
then connect the yellow power input  
leads.  
Black  
Note  
Locate the power cord and the RCA pin cord as far away as possible.  
 
Connection  
Connection example  
Cautions  
This unit is designed for negative ground 12 V DC operation only.  
Before making connections, turn the car ignition off to avoid short circuits.  
• Connect the yellow power input cord only after all other cords have been connected.  
Run all ground leads to a common ground point.  
Sony BUS Compatible  
XM Antenna*  
Car Audio*  
XT-XM1  
CD/MD changer*  
* not supplied  
Connection diagram  
Note  
Connect with a BUS cable to  
the XM Satellite receiver,  
aligning the v marks.  
When you use an optional BUS cable, note  
that a BUS cable with an 8-pin plug (L-type)  
cannot be used because of its shape.  
SONY BUS CONTROL  
AUDIO  
ANTENNA  
OUT  
IN  
L
OUT  
R
L
IN  
R
TER  
SAT  
POWER  
Green  
Yellow  
2
XM antenna  
(not supplied)  
Connect with the connector  
hook facing down.  
RCA pin cord  
(not supplied)  
OUT  
Fuse (3 A)  
To a +12 V power terminal which  
Yellow  
is energized at all times  
Be sure to connect the black ground  
lead to it first.  
CD/MD changer  
(not supplied)  
OUT  
IN  
BUS cable  
(not supplied)  
4
3
Sony BUS Compatible  
Car Audio  
To a metal point on the car  
First connect the black ground lead,  
then connect the yellow power input  
leads.  
Black  
(not supplied)  
IN  
Note  
Locate the power cord and the RCA pin cord as far away as possible.  
 
Additional Information  
Troubleshooting  
Cautions  
Should any problem persist after you have made the following checks, consult your nearest Sony  
dealer. Consult XM if you have any questions or problems concerning the broadcast service of the XM  
Satellite radio.  
This unit is designed for negative ground 12 V DC operation only.  
Before making connections, turn the car ignition off to avoid short circuits.  
• Connect the yellow power input cord only after all other cords have been connected.  
Run all ground leads to a common ground point.  
The information on the display cannot be changed during XM Satellite Radio reception.  
Refer to “Caution” in “Getting Started.”  
No sound.  
Adjust the volume control of the master unit.  
Cancel the attenuate function on the master unit.  
The connecting cords are not connected properly.  
The sound is impaired by noise.  
Locate cords and cables such as an antenna cord, a BUS cable, an RCA pin cord, or a power cord so  
as they do not interfere with each other.  
The channels cannot be received.  
Check the connections of the receiver and the antenna.  
Advisory Messages (for users of Basic Operations A)  
When a problem occurs with the receiver, an error message will be displayed on the master unit.  
CHECK ANTENNA  
The antenna is not connected properly.  
t Check the connections of the receiver and the antenna.  
UPDATING  
You have not subscribed to XM, or the channel is not authorized.  
t You need to subscribe to XM.  
NO SIGNAL  
XM signal is too weak.  
t Move to another area where your system can receive the signal.  
OFF AIR  
The channel is not broadcasting now.  
t Select another channel.  
LOADING  
The receiver is reading the channel information.  
t Wait until the receiver completes receiving the information.  
“– – – – – – – – ”  
Depending on the station, Artist Name/Program Name, Song Title and Category Name does not  
transmit. In this case, “– – – – – – – – ” is displayed. This is not an error.  
“CH – – –”  
The channel to be tuned-in is void due to a change by the broadcast service, or the reception is not  
good.  
CONTROL  
IN  
AUDIO  
ANTENNA  
Advisory Messages (for users of Basic Operations B)  
L
OUT  
R
L
IN  
R
TER  
SAT  
When a problem occurs with the receiver, an error message will be displayed on the master unit.  
ANTENNA  
The antenna is not connected properly.  
t Check the connections of the receiver and the antenna.  
Green  
Yellow  
UPDATING  
You have not subscribed to XM, or the channel is not authorized.  
t You need to subscribe to XM.  
XM antenna  
(not supplied)  
NO SIGNL  
XM signal is too weak.  
t Move to another area where your system can receive the signal.  
OFF AIR  
The channel is not broadcasting now.  
t Select another channel.  
LOADING  
The receiver is reading the channel information.  
t Wait until the receiver completes receiving the information.  
RCA pin cord  
(not supplied)  
OUT  
“– – – – ”  
Depending on the station, Artist Name/Program Name, Song Title and Category Name does not  
transmit. In this case, “– – – – ” is displayed. This is not an error.  
CD/MD changer  
(not supplied)  
“CH – – –”* or “XM – – –”*  
The channel to be tuned-in is void due to a change by the broadcast service, or the reception is not  
good.  
OUT  
IN  
BUS cable  
(not supplied)  
* Depending on the master unit, either “CH – – –” or “XM – – –” appears. For details, refer to the “Initial  
setting” on the other side of these instructions.  
4
3
Sony BUS Compatible  
Car Audio  
(not supplied)  
IN  
 

Sennheiser Network Router LSP 500 PRO User Manual
Sharp Car Stereo System XL UH4H User Manual
Sony Car Speaker XS R6941 User Manual
Sony Digital Camera Alpha 100 User Manual
Sony Speaker SRS D4100 User Manual
Stiga Lawn Mower Accessory 8211 1227 02 User Manual
Subaru Automobile 2010 Legacy User Manual
Sylvania DVD Player DVL150F User Manual
System Sensor Smoke Alarm DH100ACDCP User Manual
Tandy Portable Radio 120 2157 User Manual