XMR6910
INSTALLATION/OWNERS MANUAL
AM/FM/CD/XM Ready Receiver with Detach Face
An optional XM Satellite Radio Receiver may be connected to the XMR6910.
XM subscription is required for reception. For more information, visit XM’s website at
XMR6910 INSTALLATION
Wiring Diagram
FUSE
When replacing a fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XMR6910 uses one
10 amp ATM fuse located
beside the wiring connector.
3
XMR6910 OPERATION
Control Locations
3
6
8
9
10
1
2
4
5
7
22
21 20 19
18
17
16
15
14
13 12 11
Release
Local/Distance/*Preset 8
AM/FM Scan/*Preset 7
Preset 6/Category Up
Preset 5/Category Down
Preset 4
1
2
3
4
5
6
7
8
9
12
13
14
15
16
17
18
Power
Volume
Tune/Track Down
Tune/Track Up
Auto Store/Preset Scan/Function
Band/Pause/Scroll
Eject
Preset 3/Intro
Preset 2/Random
19 Preset 1/Repeat
20 Audio
Mode/Shift
10
11
21
22
EQ/*Preset 10
Display
Mute
Loudness/*Preset 9
An optional XM Satellite Radio Receiver may be connected to the XMR6910.
XM subscription is required for reception. For more information, visit XM’s website at
*Presets 7-10 apply to XM Radio operation only.
4
XMR6910 OPERATION
General Operation
Faceplate Removal Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Semi-permanent Remove trim ring and install supplied Phillips head #1 screw
Faceplate Installation through left side of mounting frame into faceplate.
Power On/Off Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
Mode Press MODE to select between AM/FM, *XM Radio, CD and
auxiliary input. Modes of operation are indicated in the
display.
*Optional XM Satellite Radio Receiver and subscription
required for XM Radio operation.
Volume Adjust volume using rotary encoder (00-46).
Programmable Press and hold POWER for 3 seconds to program currently
Turn-On Volume selected volume level. "ON VOL" and the current volume
level will momentarily appear in the display.
Shift Function Press SHIFT for 2 seconds to activate the SHIFT function.
The SHIFT icon will appear in the display. In XM Radio mode,
the SHIFT function must be active to access the LOUDNESS
and EQ functions.
Press SHIFT again for 2 seconds to cancel.
Note:
The SHIFT function only applies to XM Radio operation.
Loudness Press LOUD to activate and deactivate loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Preset EQ Curves Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve (if one is selected).
5
XMR6910 OPERATION
General Operation
When in AM/FM, CD or AUX mode:
Display
Press DISP to select between clock and radio frequency (tuner
mode), clock and CD elapsed time/track (CD mode), or clock
and AUX (AUX mode).
When in XM Radio mode:
Press DISP to select between channel name, artist name,
song title or clock.
With the unit on, press and hold DISP until clock begins to
Set the Clock
flash, then release. Press TUNE
to adjust the hours and
nn
TUNE
to adjust the minutes. Press DISP momentarily to
ll
save the selected time.
The clock will display 12-hour time in U.S. frequency spacing
12/24-hour Clock
:
mode (PM 10 00). In European frequency spacing mode, the
:
clock will display 24-hour time (22 00).
In AM/FM tuner mode, press and hold DISP then press
Programmable Display
Priority
TUNE
to select function priority display. “FREQ” will
ll
momentarily appear in the display.
Note: "FUNC" will appear in XM, CD or AUX modes.
Radio frequency (tuner mode), XM information (XM mode),
CD elapsed time/track (CD mode) or AUX (AUX mode) will
be displayed by default.
Clock is accessed by pressing DISP momentarily.
Press and hold DISP then press TUNE
to select time
nn
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency,
XM information, CD elapsed time/track or AUX is accessed by
pressing DISP momentarily. Time display priority is not
available in XM DIRECT band.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to select clock
priority on/off.
Programmable Clock
Priority
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
The reset button is located behind the faceplate.
Reset
6
XMR6910 OPERATION
General Operation
Audio Press AUDIO to select between Volume (default), Bass,
Treble, Balance & Fader.
Bass Press AUDIO until BAS appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Treble Press AUDIO until TRE appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Balance Press AUDIO until BAL appears
Rotate encoder left/right to adjust
(BAL L 12-BAL 00-BAL R 12) BAL 00 represents equal balance
Fader Press AUDIO until FAD appears
Rotate encoder left/right to adjust
(FAD F 12-FAD 00-FAD R 12) FAD 00 represents equal fader
Source Audio Memory Individual Bass and Treble settings are retained in memory
for AM, FM, XM, CD, and AUX modes. This allows you to save
the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Confirmation Beep Press AUDIO for 3 seconds to turn confirmation beep on/off.
Mute Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
7
XMR6910 OPERATION
AM/FM Tuner Operation
Seek Tuning Press TUNE
or TUNE
momentarily to seek the
for more than 2 seconds,
nn
ll
ll
next strong station.
Manual Tuning Press TUNE
or TUNE
nn
then release. "MANUAL" will momentarily appear in the
display. Press TUNE
or TUNE
momentarily to
nn
ll
move radio frequency up or down one step at a time. Press
and hold to advance quickly. If tuning is not adjusted for 5
seconds, the unit will return to seek tuning mode (default).
"AUTO" will momentarily appear in the display.
Scan Tuning Press SCAN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCAN again to cancel.
Local/Distance Press LOC to activate local tuning for strong station reception
only. Press LOC again to cancel and resume Distance tuning
(default).
Band Press BAND to select between FM1, FM2, FM3 and AM1,
AM2 bands.
Frequency Spacing Press and hold BAND then press TUNE
to select
nn
European frequency spacing. Press and hold BAND then
press TUNE to select U.S. frequency spacing (default).
ll
Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. To
Station Presets store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Note:
Presets 7, 8, 9 and 0 apply to XM Radio operation only.
Automatically Store Press AS/PS for more than 2 seconds to automatically store
Stations the six strongest stations in the current band. Automatic
Local/Distance is activated during the initial band scan.
Preset Scan Press AS/PS for less than 2 seconds to scan presets 1-6 on
the current band, pausing for 5 seconds at each. Press
AS/PS again to cancel.
8
XMR6910 OPERATION
XM Radio Activation
Activating Your XM Receiver 1. Press MODE to select XM Radio.
(Optional) 2. Verify channel 1 (XM Preview Channel) is playing.
3. Select Channel 0. The XM receiver’s eight character Radio
ID number will appear on the XMR6910 display.
The Radio ID number is also located on the top of the
XM receiver unit.
4. Record the number here for future reference:
5. Activate your XM Satellite Radio service.
call 1-800-852-9696.
Note:
You will need to keep your XMR6910 turned on for at least
one hour after requesting activation to receive the full
channel line-up.
XM Radio - Operation
Tuning Modes Press BAND to select between XM DIRECT, XM1 and XM2
bands.
Basic Channel Selection Press TUNE
or TUNE
momentarily to select the
nn
ll
next available channel. Press and hold to advance quickly.
Direct Channel Selection Press BAND to select XM DIRECT channel entry band.
“DIRECT” will momentarily appear in the display. Enter
the desired channel using preset buttons (1-0), then press
FUNC for 3 seconds to confirm the selected channel. If the
channel is not available, "CH ---" will momentarily appear
in the display and the current channel will be retained.
Category Recall Press FUNC once to display the category of the currently
selected channel for 10 seconds. The CATEGORY icon will
appear on the display.
9
XMR6910 OPERATION
XM Radio Operation
Channel Search by
Category
Press FUNC once, the CATEGORY icon will appear on the
display. Press
or
to choose a different category, then
press TUNE
or TUNE
to choose a channel within
nn
ll
that category. Press FUNC for 3 seconds to select the desired
channel. If you do not select a channel, the channel search
will time out after several seconds and the current channel
will be retained.
Channel Search by Name
Press FUNC twice, the SEARCH icon will appear on the
display. Use the rotary encoder to select characters A-Z.
Press preset #6 to enter each character or preset #5 to clear
the entry. Press FUNC for more than 3 seconds to begin the
channel name search. If the search results are not valid,
“NOTFOUND” will momentarily appear on the display and
current channel will be retained.
Storing and Recalling
Preset Channels
Up to 20 XM channels can be stored. To store a channel,
select XM1 or XM2 band and the desired channel. Press and
hold the desired preset button (1-0) for more than 2 seconds.
When stored, the preset number will momentarily appear in
the display. The channel can be recalled anytime by pressing
the corresponding preset button.
Note:
Presets 7, 8, 9 and 0 apply to XM Radio operation only.
SHIFT function must be disabled - see page 5 for details.
Display Options
Press DISP to select between the following display options:
The selected display option will be retained in memory (when
changing channels for instance).
Example: If Artist Name is selected, and the channel is
changed, the Artist Name will be shown for the newly
selected channel.
Text Scrolling
Press SCROLL for more than 3 seconds to activate
continuous text scrolling. The current channel name, artist
name or song title will scroll continuously (if more than 8
characters). Press SCROLL for more than 3 seconds again to
cancel continuous text scrolling.
10
XMR6910 OPERATION
CD Player Operation
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
Insert CD
Eject CD
Press EJECT to eject the CD. The unit will change to previous
mode of operation (AM, FM, XM or auxiliary input). If the disc
is not removed within 10 seconds, the unit will reload the
disc. The unit does not have to be turned on to eject CD.
Press TRACK
Press TRACK
track. Pressing TRACK
to skip to the beginning of the next track.
to return to the beginning of the current
Track Select
ll
nn
again skips to the beginning of
nn
the previous track.
Press and hold TRACK
or reverse a track.
or TRACK
to fast forward
Fast Forward and Reverse
ll
nn
Press
Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
Pause
Intro
l
l
Press INT to play the first 10 seconds of each track.
Press INT again to cancel.
Press RPT to continuously repeat selected track.
Press RPT again to cancel.
Repeat
Random
Press RDM to play all tracks in random order. Press RDM
again to cancel. Random mode is retained in memory when
selecting between AM/FM, XM, CD player and auxiliary input
modes and when the unit is turned on/off.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method.
CD-R/CD-RW Compatibility
11
XMR6910 WARRANTY
Limited One-Year Warranty
This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
What to do?
If purchased within the USA:
1. Before you call for service, check your
operating instruction booklet. A slight adjustment
of any custom controls discussed in your
instruction booklet may save you a service call.
Dual Electronics Corp. warrants this product to the
original purchaser to be free from defects in material
and workmanship, under normal conditions, for a
period of one year from the date of the original
purchase.
2. If you require service during the warranty
period, you must carefully pack the product
(preferably in the original package) and ship it by
prepaid transportation with proof of the purchase
date from the retailer to the Return Center
address listed below.
Dual Electronics Corp. agrees, at our option, during
the warranty period, to repair any defect in material
or workmanship or to furnish an equal new or
renewed product in exchange without charges,
subject to verification of the defect or malfunction
and proof of the date of purchase.
3. Please describe your problem in writing and
include your name, a return UPS shipping
address (P.O. Box not acceptable), and a daytime
phone number with your shipment.
During the One-Year Warranty Period: For One Year
from the date of purchase, your product will be
replaced with a new, renewed or comparable product
(whichever is deemed necessary) if it becomes
defective or inoperative. This is done without charge
to you. Replacement products are warranted for the
balance of the original warranty period.
4. DUAL will pay the return shipping charges if
the product is returned to an address within the
48 contiguous states.
Dual Electronics Corp.
Attn: Returns Center
21318 64th Ave. South
Kent, WA 98032 U.S.A.
Toll Free: 1-866-626-7863
Who is covered? This warranty is extended to the
original retail purchaser for products purchased and
used in the U.S.A.
What is covered? This warranty covers all defects in
material and workmanship in this product. The
following are not covered: installation/removal costs,
damage resulting from accident, misuse, abuse,
neglect, product modification, improper installation,
incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product, or
damage occurring during return shipment of the
product.
If purchased outside the USA:
Please return the unit to original place of purchase
for warranty service.
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation the
implied warranties of merchantability and fitness for
a particular purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether or not
arising from the company’s negligence, actual or
imputed. No person or representative is authorized to
assume for the company any other liability in
connection with the sale of this product. In no event
shall the company be liable for indirect, incidental or
consequential damages.
12
XMR6910 OPERATION
Specifications
CD Player Signal-to-noise: >92dB
Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 1 Bit
FM Tuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AM Tuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
General Total power output: 208 Watts Peak
Power output: 52Wx4 @ 4 ohms, 14.4 VDC
Operating voltage: 11-16 VDC, negative ground
Speaker output impedance: 4~8 ohms
Line output voltage: 2 Volts
Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)
Design and specifications subject to change without notice.
13
XMR6910 OPERATION
Troubleshooting - General
Problem
Cause
Action
Yellow wire not connected or incorrect voltage Check connections for proper voltage
Unit will not turn on
(no power)
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
(11~16VDC)
Check connection to ground
Replace fuse
Speaker wires not connected
Check connections at speakers
Unit has power
(but no sound)
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Unit blows fuses
Unit is not mounted correctly or backstrap is Check mounting sleeve and backstrap
not secure support
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches
Excessive skipping
Mechanism error
Press eject or RESET
Press eject or RESET
Press EJECT for 3 seconds to reset
CD mechanism position
ER-1 appears on display
ER-2 appears on display
Unit will not accept
a disc
Servo error or disc is in upside down
CD mechanism position out of alignment
CD transit screws still in place
Remove 2 transit screws located on top
of the unit
14
XMR6910 OPERATION
Troubleshooting - XM Radio
Problem
Cause
Action
Your XM Radio receiver is not activated
Contact XM as described on page 9
You can not receive any
XM channels
You may not be authorized to receive that
channel
Verify your subscription with XM
Contact XM as described on page 9
You can not tune into a
specific XM channel
The XM signal is blocked
Move vehicle from obstructed area
(such as inside a tunnel or a garage)
NO SIGNL appears on
display
This message may appear when driving inside Make sure the antenna has a clear view
ANTENNA appears on
display
a tunnel or under obstacles
of the sky
The XM antenna is not connected
The antenna cable is damaged
Check XM antenna connection
Check for pinched or cut antenna cable
Try another channel
OFF AIR appears on
display
The selected channel is not in service
This information may not be available for
some music channels, news channels, or
when there is no song playing
This condition is normal, there is
nothing wrong with your receiver
No song title or artist name
is displayed
Selected channel is not available
This condition is normal, there is
nothing wrong with your receiver
CH --- appears on display
15
Dual Electronics Corp.
21318 64th Ave. South
Kent, WA 98032
Toll Free: 1-866-626-7863
©2004 Dual Electronics Corp. All rights reserved.
The XM name and related logos are trademarks of XM Satellite Radio Inc.
NSA0904-V01
|